It’s not always a priority to look after your windows, but if something goes wrong you can’t hide from it. Your windows are visible both outside and inside your home. You’ll need to solve the problem as soon as possible for safety and security. Here are a few of the most common problems:

Scratches: If you have a double-glazed glass window that is scratched there are several ways to fix the problem. You can buy resin from any DIY store and fill the scratch. Special window scratch kits are also available. You can also polish the scratch out using a lint free cloth and super fine abrasive such as iron oxide. Use a household cream cleanser to avoid scratching the glass. You may need to replace the glass pane if neither of these solutions works. For Windows and Doors Bridgwater, visit https://choicetradeframes.co.uk/upvc-windows-doors/bridgwater

Putty: The putty that holds the glass in place can become brittle and dry over time if you have an older timber frame. This can cause leaks, draughts, and the window to fall out. Take the following steps to prevent this from happening:

• The putty can be softened by soaking it in bleach before you remove it with a chisel.
• Apply the putty firmly to the glass edges by rolling it into a sausage-shaped shape.
• After applying the putty, you can shape and smooth it using a dampened putty blade.

For double glazing It will look fantastic and you’ll save money on energy bills.

Condensation: If your double glazing is fairly old, you may still have problems with condensation. If you notice this, your window seals may be broken. This problem can only be fixed by replacing the glass.

It’s best to address the issue as soon as possible, since moisture between windows can cause mildew, mould, and even rot. Installing a dehumidifier or fan will increase ventilation in the meantime. This is especially important for rooms such as bathrooms and kitchens.

Sills: Often overlooked, window sills can be very exposed to the elements. Once damaged, wooden sills are difficult to repair. You can protect them by covering the sill with a piece of aluminium sheet. It is necessary to fix the sheet in place using a 1″ roofing nail and then hammer tap it to shape. Seal all edges with putty to ensure complete protection. Paint the sill in a metallic primer so that it matches the rest of your windows. Replace with uPVC, which is easy to maintain, and also highly durable.